Paw Prints Soaps

final

These cute paw prints soaps are perfect for the animal lovers in your life!

You Will Need:
Paw Prints Soap Mold
Melt & Pour Soap Bases (clear and opaque)
-Microwavable Pouring Container
Liquid Dye Dropper
Black Oxide
Glimmer Beige Mica (or other preferred bath & body colorant)
Fragrance Oil (optional)
-Alcohol Sprayer (optional)

blackoxide

Step 1:
Melt a small amount (around 4 oz) of Clear Melt & Pour Soap Base. Any of the clear bases will work for this, as they will take the black color much better than the opaque bases. Cut into small chunks and melt in the microwave in 30 second increments. Add fragrance if desired, and stir in the Black Oxide until you are satisfied with the color.

droppersoap

Step 2:
Squeeze some of the black soap into your liquid dye dropper and squeeze it back out into each paw print sections of the cavities. The dropper makes it easier to get the soap in the appropriate area without spilling over the edges. Once all of the paw print sections are poured, allow them to cool until they are solid to the touch.

scoresoap

Step 3:
When the soap has hardened, use a fork to make score marks across the top to help them adhere to the second layer.

addfragrance

Step 4:
Prepare your opaque soap base by melting chunks in the microwave in 30 second increments. You will need about 13 more ounces of soap to fill all 3 cavities. Add your fragrance and colorant if desired.

pourlayer

Step 5:
Pour your second layer of soap into each cavity at about 160-170 degrees F. You want the soap to be hot enough to adhere the layers together, but not so hot that it will warp the plastic molds.

sprayalcohol

Step 6:
If you wish, you can use a sprayer bottle full of rubbing alcohol to spray the tops of the soaps before they cool to get rid of any bubbles.

removesoap

Step 7:
When the soaps have cooled completely, gently pop them out of the molds using your thumbs to help push them out. If you have trouble getting them out, try putting them in the freezer for about 5-10 minutes and try again. Do not try to force the soaps out because you don’t want the layers to separate. Once the soaps have been removed they are ready to use, sell, or give as gifts!


5 comments on “Paw Prints Soaps
  1. This is really neat looking, but I’ve read that a dog’s PH differs from a human’s PH and that human soaps should not be used on dogs. How would you respond to this? I’m asking because I do exclusively M&P, and I’ve been asked recently about making a dog soap bar.

    • chelsea says:

      Hi Lea Anne,

      Our soap bases are intended for human skin, and have not been tested or recommended for animals. I would ask a veterinarian what they recommend for dog soap. I hope this helps!

  2. Sondra Sanders says:

    These paws are the easiest and one of the cutest soaps I have ever made. A friend came by just as I was unmolding them. She begged me to let her have them. So I did and then made more.

    If you want cute and easy, this is the one for you.

  3. Lyn says:

    Can these moulds be used for candle melts? What are the measurements? Thank you.

Leave a Reply to Lea Anne Locke Cancel reply

Your email address will not be published. Required fields are marked *

*

Candle Making

candle making instructions

Whether you are a seasoned pro looking for inspirational ideas, or a budding candle maker, our step-by-step tutorials will walk you through numerous candle making projects.

Bath & Body

bath body soapmaking

Here we have a number of different demonstrations and projects for soap making, as well as other bath and body products.

Fragrant Living

Fragrant Living Projects

Who doesn't like things that smell good? Here are a few other projects that might interest you.