Disassemble
a Bic pen. What you are after is the barrel (white). Discard the rest.
Straighten
your pre-tabbed wicks out. They don't need to be perfectly straight.
Insert
a pre-tabbed wick through the barrel of the pen as shown. 6"
wicks are good for this. If you have a different length, you may have
to improvise. The point of the barrel is that it makes handling the
wick much easier.
While
holding the wick within the barrel, apply hot-glue to the base of
the wick tab. In the photo to the left, we are using a glue
pot. However, a hot-glue gun will work just as well.
Using
the barrel to guide the wick, press the tab to the center of your
container.
Slide
the barrel off the wick.
Proceed
to the next step.
(I
promise the next page won't have so many images)
